Access Point Mode Setup Example; Figure 63 Windows 2000: Start - ZyXEL Communications ZyXEL AG-220 User Manual

Access Point Mode Setup Example

This example uses the network sharing feature in Windows 2000 to bridge the wired and
wireless network when you set the AG-220 in access point (AP) mode.
Refer to Chapter 5 on page 73
Steps may vary depending on your Windows version. You may need to install additional
software in Windows 98 Second Edition and Windows ME.
Configuring the Computer on Which You Install the AG-220
1 Refer to
2 Click Start, Settings, Network and Dial-up Connections (or click Start, Settings,
Control Panel and double-click Network and Dial-up Connections).

Figure 63 Windows 2000: Start

3 Right-click on the icon for your wired Ethernet adapter and click Properties.
Appendix B
for setup methods and requirements.
Section 1.2.3 on page 25
A
P P E N D I X
to set the AG-220 to operate in AP mode.
ZyXEL AG-220 User's Guide
B
89