USING YOUR HEADSET
EN
ADDITIONAL FEATURES
Redialling Last Number
To activate last number redial, double press the call
control button. You will hear a high tone after each press.
Using Voice Dialling
With the headset on, press and hold the call control
button for 2 seconds to activate voice dialling.
NOTE:
To use voice activated dialling, the voice dialling
feature must be enabled on your phone. See your
Bluetooth phone manual for instructions.
Rejecting a Call
When receiving an incoming call, press and hold the call
control button for 8 seconds to reject the call.
Switching a Call from Phone to Headset
To switch an active call from your phone to your headset,
briefly press the call control button for
2 seconds.
Switching a Call from Headset to Phone
To switch an active call from your headset to your phone,
press and hold the call control button for
2 seconds.
MOVING OUT OF RANGE
As the headset moves more than 33 feet (10 metres)
away from the Bluetooth device or encounters
interference:
•
Audio quality will degrade
•
A beep will be heard in the headset when the
connection drops between headset and Bluetooth
device
•
When out of range, only the power off function will
operate
If any of the above occur, move closer to your Bluetooth
device.
38
38