Bridge Mode - ZyXEL Communications P-2302R-P1 Series Quick Start Manual

3.5 Regular Phone Line Configuration (P-2302RL-P1 only)
When one of your VoIP accounts is registered, the P-2302R-P1 normally uses the Internet (not the regular
phone line) to make phone calls. Follow the directions in this section to make sure you can also use the
regular phone line while one of your VoIP accounts is registered.
In the main screen, click VoIP > PSTN Line.
PSTN Line Pre-fix Number: If you want to make a regular phone call while one of your VoIP accounts is
registered, you have to dial this number before you dial the phone number.
Relay to PSTN Line: Enter phone numbers for regular phone calls (that do not use the Internet) that you
always want to dial without the prefix number. For example, enter emergency phone numbers here.
Click Apply.

3.6 Bridge Mode

The P-2302R-P1 supports two modes, Router and Bridge. Usually, you should use Router mode because it
supports all the features available in the P-2302R-P1. However, you might use Bridge mode in the following
situation:
• There is another router or gateway in the network; and
• You only want to use the P-2302R-P1 for VoIP and Internet access. You do not want to use other features, such
as the firewall, even with their default settings.
If you want to use Bridge mode, follow these steps.
P-2302R-P1 Series Quick Start Guide
9