3.2 Connection Wizard
If you subscribe to a Roadrunner service, you cannot use the
connection. In this case, please see the User's Guide for instructions.
Note: You must have Internet access before you can complete this section.
1 In the Wizard Setup screen, click Connection
Wizard.
3 System Name is used to identify the P-2302R-P1
in the network. Use the default value, unless you
know the name is already used in the network.
Domain Name (optional): Enter the appropriate
name, if there is one, or use the default value.
Click Next.
P-2302R-P1 Series Quick Start Guide
2 Click Next.
4 This screen has different fields, depending on the
5
Connection Wizard
connection type (encapsulation) your ISP uses.
Select Ethernet or PPP over Ethernet (PPPoE). If
you are not sure and if your ISP gave you a user
name and password, select PPP over Ethernet.
Then, follow the instructions in the appropriate
section below.
to set up your Internet