Figure 31 Security Settings: Wpa/Wpa2; Table 10 Security Setting: Wpa/Wpa2 - ZyXEL Communications NWD210N User Manual

Figure 31 Security Settings: WPA/WPA2

The following table describes the labels in this screen.

Table 10 Security Setting: WPA/WPA2

LABEL
Encryption Type
EAP Type
Login Name
Password
Certificate
Validate Server
Certificate
PEAP Inner EAP
TTLS Protocol
Back
Next
Exit
NWD210N User's Guide
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.2.1.3 on page 39
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS, PEAP
and TTLS (at the time of writing, TTLS is not available in Windows Vista).
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the EAP Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the EAP Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select this to verify the certificate of the authentication server.
If you select this and click Next, the Server Certificate Setting screen displays.
This field is only available when you select PEAP in the EAP Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
This field is available only when you select TTLS in the EAP Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP, MS-
CHAP, MS-CHAP-V2 and PAP.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Summary screen (refer
to Section 4.3.3 on page 55.)
If you selected Validate Server Certificate, the Server Certificate Setting
screen displays (refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
Chapter 4 Wireless Configuration
for more information.
55).
53