Figure 117 Windows Xp: Protected Eap Properties; Table 32 Windows Xp: Protected Eap Properties - ZyXEL Communications NWD210N User Manual

Appendix C Windows Wireless Management
Protected EAP Properties

Figure 117 Windows XP: Protected EAP Properties

The following table describes the labels in this screen.

Table 32 Windows XP: Protected EAP Properties

LABEL
Validate server
certificate
Connect to these
servers
Trusted Root
Certification
Authorities:
Do not prompt
user to authorize
new server or
trusted
certification
authorities.
Select
Authentication
Method:
Enable Fast
Reconnect
OK
Cancel
134
DESCRIPTION
Select the check box to verify the certificate of the authentication server.
Select the check box and specify a domain in the field below to have your
computer connect to a server which resides only within this domain.
Select a trusted certification authority from the list below.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select this check box to verify a new authentication server or trusted CA without
prompting.
This field is available only if you installed the Windows XP server pack 2.
Select an authentication method from the drop-down list box and click Configure
to do settings.
Select the check box to automatically reconnect to the network (without re-
authentication) if the wireless connection goes down.
Click OK to save your changes.
Click Cancel to leave this screen without saving any changes you may have
made.
NWD210N User's Guide