Figure 18 Zyxel Utility: Profile Activate - ZyXEL Communications NWD210N User Manual

Chapter 2 Tutorial
Only one profile can be activated and used at any given time.

Figure 18 ZyXEL Utility: Profile Activate

8 When you activate the new profile, the ZyXEL utility goes to the Link Info screen while
it connects to the AP using your settings. When the wireless link is established, the
ZyXEL utility icon in the system tray turns green and the Link Info screen displays
details of the active connection.
9 Make sure the selected AP in the active profile is on and connected to the Internet. Open
your Internet browser, enter
the address bar and press ENTER. If you are able to access the web site, your new profile
is successfully configured.
10 If you cannot access the Internet, go back to the Profile screen. Select the profile you are
using and click Edit. Check the details you entered previously. Also, refer to the
Troubleshooting section of this User's Guide or contact your network administrator if
necessary.
36
http://www.zyxel.com or the URL of any other web site in
NWD210N User's Guide