Application Overview; Infrastructure; Table 2 Nwd210N Leds - ZyXEL Communications NWD210N User Manual

Chapter 1 Getting Started
Table 1 NWD210N External View
LABEL
B
C
The following table describes the operation of the NWD210N's LEDs.

Table 2 NWD210N LEDs

LED COLOR
Blue

1.2 Application Overview

This section describes some network applications for the NWD210N. You can either set the
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).

1.2.1 Infrastructure

To connect to a network via an access point (AP), set the NWD210N network type to
Infrastructure (see
wired network behind the AP.
22
DESCRIPTION
USB connector
USB connector cap.
STATUS DESCRIPTION
On The NWD210N is turned on, connected to an AP, and is not
transmitting or receiving data.
Blinking The NWD210N is turned on, but is not connected to a wireless
regularly and network.
rapidly
Blinking The NWD210N is turned on, connected to a wireless network,
regularly and and is not transmitting or receiving data.
slowly
Blinking The NWD210N is turned on, connected to a wireless network and
Irregularly is transmitting or receiving data.
Off The NWD210N is turned off.
Chapter 4 on page 56). Through the AP, you can access the Internet or the
NWD210N User's Guide