How To Use The Replacement Parts List - Bauer Compressors P0 Instruction Manual And Replacement Parts List

MNL-0096

1.2 How to Use the Replacement Parts List

• A lozenge  in the Item Number column indicates the part number for a complete assembly.
• a dagger (†) in the Qty column with or without an ellipse (...) in the Part Number column means the
part is illustrated for assembly purposes only and is not available for sale as an individual component.
This part can be obtained by ordering the complete assembly.
• AR in the Qty column means that the item is cut or manufactured to the size which the customer spec-
ifies.
• A dash (—) in the Item Number column indicates that there is more than one part number applicable
to the preceding Item Number.
• The letters in the columns labeled Kit indicate the number of operating hours when the part is to be
replaced; a = replaced every 1,000 hours, b = replaced every 2,000 hours and c= replaced every 4,000
hours.
• NS in the Item Number column indicates the part is not illustrated but is available.
When placing an order for spare parts, please provide the following information to ensure delivery of the
correct parts. The model number, date of manufacture and serial number can be found of the compressor
unit identification plate on the compressor unit frame.
Figure 1-1
April 17, 2013
Information
Model Number
Serial Number
Date of Manufacture
Part Number
Part Description
Part Quantity Required
Compressor Identification Label
BAUER COMPRESSORS, INC.
NORFOLK, VA 23502 U.S.A. (757) 855-6006
MODEL NO.
BLOCK NO.
SERIAL NO.
QUANTITY
MFG. DATE
Example
VC 120
143156
02/2013
VAL-0500
Valve
1
Page 2