Cartridge Replacement; Figure 4-4 Oil And Water Separator; Figure 4-5 Sintered Metal Filter Assembly - Bauer Compressors P0 Instruction Manual And Replacement Parts List

Figure 4-4 Oil and Water Separator
1
4
2
3
1. Filter Head
2. Sintered Metal Filter

4.4.2 Cartridge Replacement

To change the cartridge, proceed as follows. (See Figure 4-6)Disconnect the power and shut off the inlet
supply line, if applicable.
1. Depressurize the system by means of the bleed valve.
2. Unscrew the chamber head using the special wrench supplied.
3. Pull out the cartridge using the lifting ring on top of the cartridge.
Page 27
3. Center Screw
4. O -rings
Figure 4-5 Sintered Metal Filter Assembly
Purification Systems
3rd Edition, Rev 0 Chg 6