+VTD
Set default
duration of
DTMF tone
+VIT
Inactivity
timer
5.2.5 Voice Shielded DTE Commands
COMMAND
<DLE>p
<DLE>r
<DLE><ETX>
5.2.6 Voice Shielded DTE Responses
RESPONSE CODE
<DLE>0 – <DLE>9
<DLE>*, <DLE>#
<DLE>A – <DLE>D
<DLE>a
<DLE>b
<DLE>c
<DLE>d
<DLE>e
<DLE>f
<DLE>h
<DLE>q
<DLE>s
<DLE>H
<DLE>u
<DLE><ETX>
1 to 255
100
0 to 255
70
Table 22.
Voice Shielded DTE Commands
Pause: suspend voice data to the output device in playback
state.
Resume: resume suspended voice data in playback state.
Terminate voice playback state: switch to online voice
command mode after completing remaining data in buffer.
Table 23.
Voice Shielded DTE Responses
DTMF digit detected
Answer Tone detected
Busy detected
Calling Tone detected
Dial Tone detected
European Data Modem Calling Tone detected
Bell Answer Tone detected
The local handset on-hook
Quiet detected
Silence detected
The local handset on-hook
Transmission Under run in playback state
End of stream
User's Guide for ZyXEL Omni 56K USB Modem
Unit: 0.01 second.
Unit: 0.1 second.
DESCRIPTION
DESCRIPTION
5-21