ZyXEL Communications Omni 56K User Manual page 55

+FIS=vr, br, wd, ln, df, ec, bf,
st
+FCS=vr, br, wd, ln, df, ec,
bf, st
+FLI="string"
+FPI="string"
+FLP=n
+FSP=n
+FNR=rpr, tpr, idr, nsr
+FIE=n
+FPS=n
Minimum Scan Time/Line
Current Session Negotiating
Parameters
Current Session Parameters
Local Facsimile Station ID
String, TSI/CSI
Local Facsimile Station ID
String, CIG
Indicate document available for
polling
Enable/Disable polling
Negotiation Reporting Enable
Procedure Interrupt Parameter
Page Transfer Status
User's Guide for ZyXEL Omni 56K USB Modem
st=0:0 ms
st=1:5 ms
st=2:10 ms (normal); 5 ms (fine)
st=3:10 ms
st=4:20 ms (normal); 10 ms
(fine)
st=5:20 ms
st=6:40 ms (normal); 20 ms
(fine)
st=7:40 ms
Same as above.
Same as above.
N=0:No document
N=1:A document is available
N=0:Disable
N=1:Enable
Rpr= 0:Receiver parameters are
not reported.
Rpr=1:Receiver parameters are
reported.
Tpr= 0:Transmitter parameters
are not reported.
Tpr=1:Transmitter parameters
are reported.
idr= 0:ID Strings are not
reported.
idr=1:ID Strings are reported.
nsr= 0:Non-standard frames are
not reported.
nsr= 1:Non-standard frames are
reported.
n=0:Disable
n=1:Enable
n=1:Received page is good.
n=2:Page is bad; retrain is
requested.
n=3:Page is good; retrain is
5-17