ZyXEL Communications Omni 56K User Manual page 51

COMMAND
Bit rate: 12000 bit/s; V.17.
Bit rate: 14400 bit/s; V.17.
Page width: 1728 pixels in 215mm.
Page width: 2048 pixels in 255mm.
Page width: 2432 pixels in 303mm.
Page length: A4; 297mm.
Page length: B4; 364mm.
Page length: unlimited length.
Data compression format: 1-D; modified Huffman.
Data compression format: 2-D; modified Read.
Error correction disabled.
Disable binary file transfer.
Minimum scan time/line: 0 ms.
Minimum scan time/line: 5 ms.
Minimum scan time/line: 10 ms (normal); 5 ms (fine).
Minimum scan time/line: 10 ms.
Minimum scan time/line: 20 ms (normal); 10ms (fine).
Minimum scan time/line: 20 ms.
Minimum scan time/line: 40 ms (normal); 20ms (fine).
Minimum scan time/line: 40 ms.
+FDCS=vr, br, wd, Current session parameter; refer to +FDCC command.
ln, df, ec, bf, st
+FDIS=vr, br, wd, Current session negotiation parameter; refer to +FDCC
ln, df, ec, bf, st command.
+FDR Receive phase C data command; initiates document reception.
+FDT=df, vr, wd, Transmit phase C data command: release the DCE to proceed
ln with negotiation.
+FET=n End of page or document command:
More pages; same document.
End of document; another document follows.
No more pages or documents.
Procedure interrupt; another page follows.
Procedure interrupt; end of document, another document follows.
Procedure interrupt; end of document.
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
+FLO=n Flow control options:
No flow control.
Set XON/XOFF software flow control.
Set CTS/RTS hardware flow control.
+FLPL=n Document for polling command:
The DTE has no document available for polling.
Indicate a document available for polling.
+FMDL? Request DCE model.
+FMFR? Request DCE manufacturer.
User's Guide for ZyXEL Omni 56K USB Modem
DESCRIPTION VALUE
br=4
br=5
wd=0
wd=1
wd=2
ln=0
ln=1
ln=2
df=0
df=1
ec=0
bf=0
st=0
st=1
st=2
st=3
st=4
st=5
st=6
st=7
n=0
n=1
n=2
n=4
n=5
n=6
n=0
n=1
n=2
n=0
n=1
5-13