ZyXEL Communications Omni 56K User Manual page 40

User's Guide for ZyXEL Omni 56K USB Modem
COMMAND OPTIONS
Ds
DL
DSn
En
Hn
In
5-2
FUNCTION AND DESCRIPTION
B0 * Select CCITT V.22 for 1200 bps.
B1 Select Bell 212 for 1200 bps
communication.
Dial s (numbers and options) that follow
(see also S38.0, S35.4). The options of s
are listed as follows:
0-9, A, B, Digits for dialing.
C, D #, *
P Pulse dialing
T Tone dialing
Pause for a time specified in S8.
,
Remaining digits are dialed as in-band
DTMF (Dual Tone Multi-Frequency).
; Return to command state after dialing.
! Hook flash.
@ Wait for a 5 second silence before
proceeding, otherwise return NO
ANSWER.
R Reverse handshake (go online in Answer
mode).
W Wait for the second dial tone. Remaining
digits are dialed as in-band DTMF.
Dials the last-dialed number.
n=0-3 Dials the number stored in non-volatile
RAM at location 'n.'
Command mode local echo of keyboard
commands:
E0 Echo off.
E1 * Echo on.
On/off hook control:
H0 * Hang up (on-hook) the modem or ISDN,
same as 'ATH'.
H1 Off hook the modem.
Display inquired information:
I0 Display numerical product code, same as
'ATI.'
I1 Display product information and ROM
checksum.
I2 Display modem link status report.
I12 Display physical layer status.
I13 Display channel response for V.34.
Ref.
S23.1
S23.1
S56
S17.5
S44.3
S23.0