Table of Contents
Advertisement
Quick Links
OPERATING MANUAL
Page 1 of 8
(US and Canada) Toll Free 1-800-MASTERFLEX • 1-800-637-3739
(Outside US and Canada) 1-847-549-7600 • 1-847-381-7050
www.masterflex.com • techinfo@masterflex.com
ASSEMBLED BY:
MASTERFLEX
HIGH-PERFORMANCE
HAZARDOUS-DUTY
PUMP HEAD
77600-82
Printed in USA
®
®
I/P
A-1299-5136
Edition 03
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Masterflex I/P 77600-82
Summary of Contents for Masterflex I/P 77600-82
- Page 1 OPERATING MANUAL ASSEMBLED BY: ® ® MASTERFLEX HIGH-PERFORMANCE HAZARDOUS-DUTY PUMP HEAD 77600-82 A-1299-5136 Edition 03 Page 1 of 8 Printed in USA (US and Canada) Toll Free 1-800-MASTERFLEX • 1-800-637-3739 (Outside US and Canada) 1-847-549-7600 • 1-847-381-7050 www.masterflex.com • techinfo@masterflex.com...
-
Page 2: Explanation Of Symbols
Trademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries. INTRODUCTION A-1299-5136 Edition 03 Page 2 of 8 Printed in USA (US and Canada) Toll Free 1-800-MASTERFLEX • 1-800-637-3739 (Outside US and Canada) 1-847-549-7600 • 1-847-381-7050 www.masterflex.com • techinfo@masterflex.com... -
Page 3: Setup And Operation
® ® MASTERFLEX operating speeds and pressures. It is designed for optimal pumping in the clockwise direction. There are two mounting positions. Tubing entry and exit are either on the left side or on top of the pump when mounted on a MASTERFLEX drive. - Page 4 Lift the latch to open the occlusion bed. Insert the MASTERFLEX tubing inside the tubing guide and around the rotor with the ends of the tubing extending out of the tubing entrance and tubing exit as shown in Figure 3. Center the tubing on the roller.
-
Page 5: Operation
Occlusion Bed Assembly Kit 77600-67 Tang Boot 77600-02 77600-01 Mounting Screws (not shown) A-1299-5136 Edition 03 Page 5 of 8 Printed in USA (US and Canada) Toll Free 1-800-MASTERFLEX • 1-800-637-3739 (Outside US and Canada) 1-847-549-7600 • 1-847-381-7050 www.masterflex.com • techinfo@masterflex.com... -
Page 6: Specifications
-40° F to 149° F (-40° C to 65° C) Humidity 5% to 95% (non-condensing) Dimensions (W x H x D) A-1299-5136 Edition 03 Page 6 of 8 Printed in USA (US and Canada) Toll Free 1-800-MASTERFLEX • 1-800-637-3739 (Outside US and Canada) 1-847-549-7600 • 1-847-381-7050 www.masterflex.com • techinfo@masterflex.com... -
Page 7: Warranty
** L/S® 15HP and L/S® 16HP tubing are only for use with the MASTERFLEX® L/S® High-Performance Pump Head and any MASTERFLEX® L/S® 1 to 100 rpm drive capable of running two or more pump heads. ‡ Use this temperature range for continuous duty operation with no decrease in performance or product life. -
Page 8: Technical Assistance
(847) 381-7050 (Local) MASTERFLEX, I/P, EASY-LOAD – Reg TM Cole-ParmerC-FLEX, NORPRENE, PHARMED, TYGON — Reg TM Saint-Gobain Performance Plastics CorTrademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries. A-1299-5136 Edition 03...
Need help?
Do you have a question about the I/P 77600-82 and is the answer not in the manual?
Questions and answers