Table of Contents
Advertisement
Configuring the Security Settings
Click the middle Change button to change the default WEP
Encryption Key of your IG (the new string must contain five
characters). Type a new Key in place of the default (see the
section Changing the Default WEP Encryption Key on page
48 and the WEP Booklet). Select Enable password (disabled
by default) and type a password to restrict access to the IG
Setup Utility. If you want to reset the default values, click Set
defaults and Ok.
Viewing the Network Topology Settings
To access your Network Topology settings, click the bottom
Change button. The following dialog box opens:
For information, click Help. If you want to change the settings
in the dialog box, consult your network administrator.
3
Before you click Finish in the Overview Of Your Settings
screen, you can double-check all the IG settings. Use the Back
button on the bottom of the screen to return to the previous
screens.
4
Click Exit in the Ready! screen:
You have configured your IG to serve as a transparent wireless
bridge in a LAN infrastructure environment. Go to Checking the
IP Address on page 29 for an explanation of an important part of
the configuration process.
Chapter 5 Configuring Custom Settings
47
Advertisement
Table of Contents
