6.3. Firebrick and baffle plate removal
Make sure the gas control valve is "OFF" and the insert / ZC-fireplace is cool prior to conducting service.
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically ap-
proved with this insert / ZC-fireplace may result in property damage or personal injury.
To remove the baffleplate,
you have to loose the two
skrews. One in the left and
one in the right side.
The firebrick plate is fixed by a
skrew and bush. To remove the
baffleplate, you have to loosen
the skrew.
43