Hardware Required; Matériel Inclus - pottery barn kids BELDEN 4 IN 1 CRIB FULL BED CONVERSION Assembly Instructions Manual

HARDWARE REQUIRED (

(Ra)- Allen Key – 1x
(Ra) – Clé hexagonale– 1x
(Rk) – Open wrench– 1x
(Rk) – Clé ouverte– 1x
(Rn) - Flat Washer – 6x
Rn) – Rondelle plate– 6x
(P) – Medallion – 2x
(P) – Plaque décorative – 2x
HARDWARE REQUIRED (from Crib): / MATÉRIEL REQUIS (du lit d'enfant):
(Re) - Hex Bolt M6x32mm - 7x
(Re) – Boulon Hex M6x32mm - 7x
INSTRUCTIONS D'ASSEMBLAGE:
ENGLISH
1. Attached the Frontgate base (G) to Left side panel (N) and Right side panel (O) by using Hex bolts (Rf) and tighten the
bolts loosely with Allen key (Ra). See the illustration below.
Date: 2013-Apr. 23
Rev:
included with package) /
(Rb) – Hex Bolt M6x70∮13mm –4
(Rb) – Boulon hex M6x70∮13mm –4x
(Rl) – Hex Bol M6x9.8x4.2mm 6x
(Rl) – Boulon hex M6x9.8x4.2mm 6x
(Rm) – Phillips head screw
(Rm) – Vis à tête Phillips
8x30mm – 28x
(Rc) - Hex Bolt M6x63mm (2x)
(Rc) – Boulon hexagonal M6x63mm (2x)
(Rb) - Hex Bolt M6x70∮13mm -2x
(Rb) Boulon hexagonal M6x70∮13mm -2x
MATÉRIEL INCLUS
(Rf) – Hex Bolt M6x19∮13mm – 6x
(Rf) – Boulon hex M6x19∮13mm – 6x
(Rm) – Spring washer – 6x
(Rm) - Rondelle à ressort – 6x
Phillips head Screwdriver
Tournevis à tête Phillips
(inclus dans l'emballage
(Not included)
(non inclus)
Page 4/ 10
):