FLORABEST FLBA 18 A1 Operation And Safety Notes page 48

switched off before con-
necting it to the mains and/
or connecting the battery,
picking it up, or carrying
it. Carrying the power tool
with your finger on the
ON / OFF switch or connect-
ing switched on equipment
to the mains can result in
accidents.
d) Remove any setting tools or
spanners before you switch
the power tool on. Leaving a
tool or spanner attached to a
rotating part of a equipment
can lead to injury.
e) Avoid unnatural postures.
Keep proper footing and
balance at all times. This will
ensure having better control
over the power tool in un-
foreseen circumstances.
f) Wear suitable clothing. Do
not wear loose clothing or
jewellery. Keep your hair,
clothing and gloves clear of
moving parts. Loose cloth-
ing, jewellery or long hair can
become trapped in moving
parts.
g) If vacuum dust extraction
and collection equipments
are fitted do not forget to
check that they are proper-
48 GB
39583_Akku-Laubblaeser_DE_AT_NL.indd 48
ly connected and correctly
used. Using of a dust extrac-
tion system reduces the haz-
ard presented by dust.
4) Using and handling
the equipment
a) Do not overload the equip-
ment. Always use a power
tool intended for the task.
By using the right power
tool for the job you will work
more safely and achieve a
better result.
b) Do not use a power tool
with a defective switch.
Power tools that can no
longer be switched on and
off are dangerous and must
be repaired.
c) Unplug from the mains
and/or remove the battery
before adjusting the equip-
ment, changing accessories,
or setting the equipment
down. This precaution is
intended to prevent you from
unintentionally starting the
power tool.
d) Always be sure to keep
power tools out of reach of
children when not in use.
Do not let anyone use the
08.05.14 16:49