FLORABEST FLBA 18 A1 Operation And Safety Notes page 47

power tools. Unmodified
plugs and the correct sock-
ets reduce the risk of electric
shock.
b) Avoid touching grounded
surfaces such as pipes, ra-
diators, ovens, and refrig-
erators. There is an increased
risk of electric shock if your
body is earthed.
c) Keep the power tool away
from rain or moisture. Wa-
ter entering a power tool
increases the risk of electric
shock.
d) Do not use the mains lead
for any purpose for which
it was not intended, e.g. to
carry or hang up the power
tool, or to pull the mains
plug out of the mains sock-
et. Keep the mains lead
away from heat, oil, sharp
edges or moving parts of
the equipment. Damaged or
tangled cables increase the
risk of an electric shock.
e) When using power tools
outdoors, only use exten-
sion cords suitable for out-
door use. Using an extension
cable suitable for outdoor
use reduces the risk of elec-
tric shock.
39583_Akku-Laubblaeser_DE_AT_NL.indd 47
f) Use a residual current
equipment (RCD) for pro-
tection if operating the
electrical power tool in a
moist environment is un-
avoidable. Using an earth
leakage circuit breaker reduc-
es the risk of electric shock.
3) Personal Safety
a) Remain alert at all times,
watch what you are doing
and always proceed with
caution when using pow-
er tools. Do not use power
tools when tired or under
the influence of drugs, alco-
hol or medication. One mo-
ment of carelessness when
using the power tool can lead
to serious injury.
b) Always wear protective
equipment and safety
glasses. Wearing personal
protective equipment such as
a dust mask, non-slip safety
shoes, safety helmet or ear
protectors, depending on the
type and application of the
power tool, reduces the risk
of injuries.
c) Avoid accidental starting.
Verify the power tool is
GB 47
08.05.14 16:49