Overview; Technical Data; Safety Notices; Symbols And Icons - FLORABEST FLBA 18 A1 Operation And Safety Notes

Overview

A B
1. Lower blower tube
2. Upper blower tube
3. Locking button
4. Motor housing
5.
6. Handle
7. Charge indicator
8. Release button
9. Rechargeable battery
10. Connection piece
11. Operating instructions
12. Charger

Technical data

Unit .......................................FLBA 18 A1
Motor voltage .................................................18 V
Idle speed ................................ 7000 rpm / 10500 rpm
Air velocity .............................. Setting 1 (I) : 150 km/h
Run-time ..............................Setting 1 (I) : max.18 min
Weight (without charger) ................................ 1.66 kg
Noise level (L ) ....................... 79.0 dB(A), K=3 dB(A)
pA
Sound power level (L
guaranteed ......................................................92 dB(A)
measured ............................... 90.0 dB(A), K=3 dB(A)
Vibration (a ) ......................... 0.993 m/s
h
Rechargeable battery
(Li-lon) ..................................BP09Li-180
Nominal voltage ............................................18 V
Capacity ................................................................... 1.5 Ah
Charging time ...............................................................1 h
Charger ............................. FLBA 18 A1-1
Rated power input ..................................................45 W
Input voltage............................. 100-240 V~ 50/60 Hz
Output voltage ............................21 V
Protection class ........................................................
Protection class .........................................................IPX0
chargeable battery under load depends on the
method of operation and the load.
44 GB
39583_Akku-Laubblaeser_DE_AT_NL.indd 44
Setting 2 (II) : max. 210 km/h
Setting 2 (II) : max. 10 min
)
wA
2
, K=1.5 m/s
1500 mA
-
Noise- and vibration values were determined in
accordance with the standards and regulations
ject to technical changes without notice in the
course of advancement. All dimensions, notices
and information in these operating instructions
are therefore without engagement. Legal claims
based on the operating instructions can there-
fore not be asserted.
ured in accordance with a standardised testing
method and can be used to compare power tools.
serve as a preliminary assessment of the load
factor.
Warning:
The vibration emission value during
actual use of the power tool may dif-
ing on how the power tool is used.
Try to keep the vibration loads as
low as possible. Measures to reduce
the vibration load are, e.g. wearing
gloves and limiting the working
time. Wherein all states of opera-
tion must be included (e.g. times
and times where the power tool is
switched on but running without
2 load).

Safety notices

Observe the safety instructions when using this
equipment.

Symbols and icons

Symbols in the operating instructions:
Warning signs with information
/ II on preventing personal injury or
property damage.
Mandatory sign (specifying the
order in place of the exclamation
point) with information on
preventing damage.
-
-
-
08.05.14 16:49