Gedore DVV-13Z Operating Instructions Manual page 25

3. For models with return stop:
Put the return stop (G) in
the "R" (R=clockwise)
position.
4. Apply torque with torque
wrench in the clockwise
direction until desired input
torque is achieved.
5. Once the desired torque
has been attained, the
screw system is under
tension. Release the
wrench carefully. The
torque wrench can release
unexpectedly, causing
minor to moderate injuries.
For models with return
stop: Tighten the wrench
until the return stop (G) can
be turned to the "0"
position without exerting
force.
EN
25
G
G