Page 1
Supporting Device for Control Arm KL-0145-120 A 0145-120Ae170116.docx GEDORE Automotive GmbH Phone Breslauer Straße 41 Postfach 1329 .: +49 (0) 771 / 8 32 23-0 Email: info@gedore-automotive.com 78166 Donaueschingen 78154 Donaueschingen - GERMANY Fax: +49 (0) 771 / 8 32 23-90...
Page 2
Le plus grand soin possible a été apporté à la rédaction de ce document. Toutefois, nous n’assumons aucune responsabilité pour des erreurs, omissions ou défauts d’impression éventuels. Une reproduction, même en partie, ne peut être effectuée qu’après autorisation écrite préalable de GEDORE Automotive GmbH. Tous droits réservés.
Page 4
ALWAYS observe and do not exceed the maximum load capacity of the supporting device for control arm! ONLY use the original spare parts from GEDORE Automotive. NEVER use the supporting device for control arm for raising a vehicle! ...
Page 5
ALWAYS check the supporting device for control arm prior to EACH use in order to ensure that it is in good order and condition. ALWAYS replace all damaged and worn parts prior to using the supporting device for control arm. ONLY use the original spare parts and accessories from GEDORE Automotive on the supporting device for control arm. 1.5 Work Environment For safety reasons, work with the supporting device for control arm should only be carried out in a safe and secure work environment.
Page 6
Instruction Manual Product Description KL-0145-120 A KL-0145-120 A - Supporting Device for Control Arm Universal application, e.g. for the removal/installation of suspension struts. The device is used in conjunction with a transmission jack for supporting and securing control arms. The support takes place via the wheel hub.
Page 7
NEVER use the supporting device for control arm for raising vehicles! ONLY use the original spare parts from GEDORE Automotive. ATTENTION Risk of damage to vehicle and supporting device for control arm.
Need help?
Do you have a question about the KL-0145-120 A and is the answer not in the manual?
Questions and answers