Gedore DVV-13Z Operating Instructions Manual page 22

Determining the input torque:
To obtain the output torque, you must determine the correct input torque so
that you can set the torque wrench. There are three different options for
determining the input torque:
1. Factory Calibration Certificate
2. Torque calculator
3. Manual Calculation
Option 1 – Factory Calibration Certificate:
 Consult the factory calibration certificate.
 The certificate displays the input torque
required to obtain the listed output torque
values.
 If you need to calculate to a specific value
that isn't listed, see Option 3.
Option 2 – Torque calculator:
 Consult the Torque calculator.
 Calibrate the desired output torque.
 Read the input torque specified for your type
of Torque Multiplier.
 If you need to calculate to a specific value
that isn't listed, see Option 3.
EN
22