Preparing The Torque Multiplier; Required Parts And Accessories - Gedore DVV-13Z Operating Instructions Manual

3

Preparing the Torque Multiplier

Before using your Torque Multiplier for the first time, confirm that you
have all of the following parts and accessories.
NEVER use the Torque Multiplier if it has been dropped, used to
strike other objects, or if anything has fallen on it. A damaged Torque
Multiplier may slip or break during use causing SERIOUS INJURY or
DEATH.
ALWAYS assemble the Torque Multiplier and its components on a
work bench. During the assembly of the Torque Multiplier, parts can
fall and become damaged.

3.1 Required Parts and Accessories

Before using your Torque Multiplier for the first time, confirm that you
have all of the following parts and accessories:
Required parts included with your Torque Multiplier:
 Torque Multiplier
 Reaction arm, stepped or straight (except DVV-540RS)
 Factory calibration certificate (except DVV-540RS)
 Torque calculator
 Operating Instructions
Required accessories not included with your Torque Multiplier:
 Suitable Torque wrench
 Impact socket with rubber ring and locking pin or similar locking
 Suitable ratchet
EN
14