Table of Contents
Advertisement
8.0
Routine Maintenance
All CueScript prompter monitors are designed to be low maintenance. Recommended maintenance is as
follows:
Remove dust from the cabinet when it accumulates. The front LCD panel may cleaned with a soft cotton
cloth. Use only a small amount of mild soap and water solution to dampen the cloth if necessary.
No routine checks or adjustments are required.
9.0
Installation
9.1
Inspecting New Prompter and Accessories
Each item should be inspected as it is unpacked to see if any damage has occurred in shipping. If so,
please file a claim with the shipping carrier. Please retain the original packaging in case it is
necessary to return the unit.
Any missing items should be noted and brought to the attention of the shipper.
9.2
Installation Requirements
The following requirements should be observed when installing a CSM17/19 V2 prompter.
Do not exceed the maximum operating ambient temperature of +40°C .
Do not block any ventilation holes in the prompter cabinet. Free flow of air is required for proper
operation.
Use the power supply cord supplied with the unit. Connect the cord to a grounded AC mains outlet.
EMC and Safety Compliance: CSM17/19 V2 Prompters have been designed for EMC and safety
compliance. The installer or operator is responsible for compliance of the system as built and used
under the regulations governing such use.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the CSM V2 Series and is the answer not in the manual?