Backlight Inactivity Control; Input Select; Image Rotate; Menu Start - CueScript CSM V2 Series Installation And Operation Manual

8) Menu item previous
9 Menu on-screen

11.2 Backlight Inactivity Control

The prompter continuously monitors on-screen activity. If the display is static for a certain period
(set in the menu), the backlight will shut down to conserve power. It can be restored by a
momentary press of any button. The backlight will also be restored if there is any change in the
picture content.

11.3 Input select

Cycle sequence > CueTalk > SFP+ (ST2110)* > Prompt SDI > Talent SDI > Composite > HDMI >
* When option installed

11.4 Image rotate

Alternates between horizontal and vertical switch (flip/mirror).
12.0 Menu operation

12.1 Menu Start

•
Activates the OSD (On-Screen-Display) menu
•
Reverts to one higher level menu page

12.2 Menu Fwd/In

•
Moves the OSD selection into an item
•
Scrolls forward through a list

12.3 Menu Back/Out

•
Moves the OSD selection out of an item
•
Scrolls backwards through a list

12.4 Menu Down

•
Scrolls down a list

12.5 Menu Up

•
Scrolls up a list
All menu settings are written to non-volatile memory. Following a power cycle, the last-used
settings will automatically be restored to the monitor set-up.
When you select the factory default menu item, all CueScript factory default values are applied and
all LCD controller factory defaults are also applied.
See the next three pages for a detailed table of the menu structure. Following the tables, there are
notes explaining the various features.
11