Safety Information; Warnings - CueScript CSM V2 Series Installation And Operation Manual

Next generation on-camera prompter displays
Table of Contents

Advertisement

14.0 SAFETY INFORMATION

The CueScript model CS- 15", 17", and 19" prompter monitors are not user serviceable. Please return to
CueScript in the event that servicing is required. After any servicing, the CueScript service center will re-test
each prompter to ensure product safety is intact.
In no event should any modification be made to any CueScript prompter without authorization from
CueScript. Doing so without authorization will void the warranty and possibly affect the safety of the
product.

15.0 WARNINGS

The following warning symbol and stipulation appear on the underside of the CueScript monitors:
WARNING: NO USER SERVICEABLE PARTS INSIDE
The CueScript prompters utilize switching power supplies which inherently have high voltages appearing
within the circuitry. Specialized equipment and skill are required to service this equipment. Touching
anything on the inside of the cabinet with the cover removed can be extremely dangerous.
In addition, the following warning is given:
THIS EQUIPMENT MUST BE EARTH
GROUNDED.
In order to prevent accidental electric shocks or other hazards, the AC mains power cord must be
connected to an earth grounded receptacle.
There is another warning symbol near the DC power input XLR jack.
For 12 Volt DC operation, you must unplug the power source connector (4 pin XLR) to shut the monitor
down. There is no On-Off switch when the prompter is powered with 12 VDC.
Before removing any cabinet part, you must remove both the 12 VDC power and the 100-240 VAC mains
power to ensure that the prompter is not powered up by either source.
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSM V2 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Csm17Csm19

Table of Contents