National Instruments 7330 User Manual And Specifications page 50

Glossary
trapezoidal profile
trigger
TTL
V
V
V
CC
velocity mode
W
watchdog
word
G-8 | ni.com
A typical motion trajectory, where a motor accelerates up to the
programmed velocity using the programmed acceleration, traverses at
the programmed velocity, then decelerates at the programmed
acceleration to the target position.
Any event that causes or starts some form of data capture.
transistor-transistor logic
volts
Positive voltage supply.
Move the axis continuously at the specified velocity.
A timer task that shuts down (resets) the motion control board if any
serious error occurs.
The standard number of bits that a processor or memory manipulates
at one time, typically 8-, 16-, or 32-bit.