National Instruments 7330 User Manual And Specifications page 47

K
k
K
L
LIFO
limit switch/
end-of-travel position
(input)
M
m
MCS
microstep
modulo position
kilo—the standard metric prefix for 1,000, or 10
measure such as volts, hertz, and meters.
kilo—the prefix for 1,024, or 2
computer memory.
last-in, first-out
Sensors that alert the control electronics that physical end of travel is
being approached and that the motion should stop.
meters
move complete status
The proportional control of energy in the coils of a Stepper Motor that
allow the motor to move to or stop at locations other than the fixed
magnetic/mechanical pole positions determined by the motor
specifications. This capability facilitates the subdivision of full
mechanical steps on a stepper motor into finer microstep locations that
greatly smooth motor running operation and increase the resolution or
number of discrete positions that a stepper motor can attain in each
revolution.
Treat the position as within the range of total quadrature counts per
revolution for an axis.
NI 7330 User Manual and Specifications
3
, used with units of
10
, used with B in quantifying data or
© National Instruments | G-5