National Instruments 7330 User Manual And Specifications page 49

Q
quadrature counts
R
RAM
relative breakpoint
relative position
relative position mode
ribbon cable
RPM
RPSPS or RPS/S
RTR
RTSI
S
s
servo
stepper
T
toggle
torque
The encoder line resolution times four.
random-access memory
Sets the position breakpoint for an encoder in relative quadrature
counts.
Destination or target position for motion specified with respect to the
current location regardless of its value.
Position relative to current position.
A flat cable in which the conductors are side by side.
revolutions per minute—units for velocity.
revolutions per second squared—units for acceleration and
deceleration.
ready to receive
real-time system integration bus—the National Instruments timing
bus that connects devices directly, by means of connectors on top of
the devices, for precise synchronization of functions.
seconds
Specifies an axis that controls a servo motor.
Specifies an axis that controls a stepper motor.
Changing state from high to low, back to high, and so on.
Force tending to produce rotation.
NI 7330 User Manual and Specifications
© National Instruments | G-7