National Instruments 7330 User Manual And Specifications page 40

Appendix A Specifications
In the United States (per FCC 47 CFR), Class A equipment is intended for use
Note
in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada,
Australia and New Zealand (per CISPR 11) Class A equipment is intended for use
only in heavy-industrial locations.
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
Note
equipment that does not intentionally generate radio frequency energy for the
treatment of material or inspection/analysis purposes.
For EMC declarations and certifications, and additional information, refer to
Note
the Online Product Certification section.
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Online Product Certification
To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit
ni.com/certification
link in the Certification column.
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the Minimize Our Environmental Impact web
page at
ni.com/environment
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
a WEEE recycling center. For more information about WEEE recycling centers,
National Instruments WEEE initiatives, and compliance with WEEE Directive
2002/96/EC on Waste and Electronic Equipment, visit
.
weee
(RoHS)
environment/rohs_china
go to
ni.com/environment/rohs_china
A-6 | ni.com
, search by model number or product line, and click the appropriate
. This page contains the environmental regulations and
At the end of the product life cycle, all products must be sent to
National Instruments
National Instruments RoHS
(For information about China RoHS compliance,
.)
ni.com/environment/
ni.com/