Advertisement
Quick Links
Advertisement
Related Manuals for Atag VA6311AF
Summary of Contents for Atag VA6311AF
- Page 1 User manual Dishwasher VA6311AF...
- Page 2 Contents Safety information ........2 Select and start a washing programme Product description ........ 3 Unloading the dishwasher ....13 Control panel .......... 4 Washing programmes ......13 First use ..........5 Care and cleaning ........ 14 Set the water softener ......5 What to do if…...
- Page 3 Installation aged; or if the control panel, work top or plinth area are damaged such that the in- • Check your dishwasher for any transport side of the appliance is freely accessible. damage. Never connect a damaged ma- Contact your local Service Force centre, in chine.
- Page 4 Control panel Programme selection buttons Delay start button Indicator lights On/Off button Digital display Function buttons Indicator lights Programme in progress Comes on when a washing programme is set. Multitab function (MULTITABLET) Indicates the activation/deactivation of the Multi- tab function. Refer to Multitab function. Salt Comes on when the special salt has run out.
- Page 5 The digital display gress indicator light is off. The appliance is in setting mode. The digital display indicates: • the level of hardness to which the water Always remember that when performing softener is set, the following operations: • the approximate remaining time of the run- –...
- Page 6 Water hardness Adjusting the water hardness setting Use of salt °dH °TH mmol/l manually electronically 51 - 70 91 - 125 9,1 - 12,5 level 10 43 - 50 76 - 90 7,6 - 9,0 level 9 37 - 42 65 - 75 6,5 - 7,5 level 8...
- Page 7 2. Pour 1 litre of water into the container 4. Replace the cap making sure that there is no trace of salt on the screw thread or (this is necessary only before filling with salt for the first time) . on the gasket.
- Page 8 of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
- Page 9 Load cutlery and dishes The lower basket The lower basket is designed to take sauce- pan, lids, plates, salad bowls, cutlery etc. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. The rows of prongs on the right side in the Mix spoons with other cutlery to prevent lower basket can lie flat to allow you to load...
- Page 10 Maximum height of the dishes in the lower basket With upper basket 30 cm raised With upper basket 29 cm lowered To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Hold the upper basket by the handle on the side.
- Page 11 2. Fill the detergent dispenser (1) with de- tergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 4. Close the lid and press until it locks in place. Detergent tablets from different manu- facturers dissolve at different rates.
- Page 12 If the drying results are not Rinse aid dispenser activated satisfactory we suggest that you: 4. To change the setting, press button B 1. Fill up the rinse aid dispenser with again, the digital display indicates the rinse aid. new setting. 2.
- Page 13 5. Once the delay start has elapsed the pro- gramme lights come on and the pro- gramme will start automatically. gramme in progress indicator light goes off. The selection of the washing pro- • Cancelling a delay start will also cancel the gramme and delay start can also occur washing programme.
- Page 14 Programme Degree of soil Type of load Programme description Main wash Crockery and Light soil 1 intermediate rinse cutlery Quick 50° Final rinse Main wash Delicate crockery 1 intermediate rinse Normal soil and glassware Final rinse Glass 45° Drying 1) During the "Auto" washing programme the level of soiling on the dishes is determined by how cloudy the water is.
- Page 15 NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove the debris with a cocktail stick. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents.
- Page 16 What to do if… The dishwasher will not start or stops during Switch off the dishwasher, open the door operation. and carry out the following suggested cor- Certain problems can be due to the lack of rective actions. simple maintenance or oversights, which can be solved with the help of the hints described in the chart, without calling out an engineer.
- Page 17 The wash results are not satisfactory The dishes are not • The wrong programme has been selected. clean • The dishes are arranged in such a way as to stop water reaching all parts of a surface. The baskets must not be overloaded. •...
- Page 18 Arrangement upper basket Arrangement lower basket Arrangement cutlery basket Remove cup racks on the left-hand side of the upper basket. Installation Warning! Any electrical and/or The dishwasher incorporates adjustable feet plumbing work required to install to allow the adjustment of the height. During all operations that involve accessibility this appliance should be carried out by a qualified electrician and/or...
- Page 19 When the appliance is correctly levelled, the If the door does not close correctly, loosen door will not catch on either side of the cabi- or tighten the adjustable feet until the ma- net . chine is perfectly level. Water connection Water inlet connection ter inlet hose starts to leak during this opera- tion, the safety valve cuts off the running...
- Page 20 Likewise the internal diameter of the cou- plings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic mem- brane (A) must be removed.
- Page 21 Electrical connection Warning! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated volt- age and type of supply on the rating plate match that of the supply where the appliance is to be installed.
- Page 24 Nederland Home Product Service (ATAG) Postbus 249 6920 AE DUIVEN tel: 0900 - 5550001 fax: 026 - 8821444 België ATAG België NV 9420 Erpe-Mere tel: 053 - 806208 fax: 053 - 806057 Postbus 1033 • 6920 BA Duiven • Nederland...
Need help?
Do you have a question about the VA6311AF and is the answer not in the manual?
Questions and answers