Installation
5.2 Installing the base plate and elastomeric bearing
5.2.3
Preparing the load cell
NOTICE
Damage to the load cell
The following applies to prevent damage to the load cells:
• Observe the operating instructions for the load cell.
• Do not carry the load cell by its connection cables.
• When mounting the load cell, ensure that you do not damage or cut the cables of the
1. Unpack the load cell.
Figure 5-1
2. Read the accompanying information sheet.
3. Read the operating instructions for the SIWAREX WL load cells.
5.2.4
Prepare the base plate
①
②
③
Figure 5-2
1. Unpack the base plate.
2. Read the accompanying information sheet.
3. Check the delivered unit.
26
load cell.
Load cell SB-S SA
Base plate
Hexagon bolts
Washers
Product package for base plate
Operating Instructions, 03/2013, A5E31529044A-01
SB-S SA