Siemens SIWAREX WL230 Operating Instructions Manual page 37

Cleaning
The following applies to cleaning:
● We recommend the use of a pH-neutral detergent. Do not use cleaning agents containing
● Rinse the components with water after cleaning, if needed.
● Protect the rubber-metal bonding from contact with detergents using constructive
● Do not clean with sharp objects, for example, a wire brush or sandpaper.
● Check the overload protection for contamination.
SB-S SA
Operating Instructions, 03/2013, A5E31529044A-01
non-polar solvents (e.g., gasoline)!
measures.
6.2 Care and maintenance of elastomer components
Service and maintenance
37