Download Print this page
Eaton SPD Max Series Instruction Booklet

Eaton SPD Max Series Instruction Booklet

Surge protective device
Hide thumbs Also See for SPD Max Series:

Advertisement

Quick Links

Instruction Booklet IB158002EN
Eaton SPD Max Series
Surge Protective Device
Effective October 2018
Supersedes October 2014
Contents
Description
1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.0 Operating Features . . . . . . . . . . . . . . . . . . . . . 6
4.0 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 8
5.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.0 Ordering Guidelines . . . . . . . . . . . . . . . . . . . . 10
7 .0 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Page

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPD Max Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eaton SPD Max Series

  • Page 1: Table Of Contents

    Effective October 2018 Instruction Booklet IB158002EN Supersedes October 2014 Eaton SPD Max Series Surge Protective Device Contents Description Page 1.0 Introduction ......2 2.0 Installation .
  • Page 2: Introduction

    Effective October 2018 1.0 Introduction 1.4 Catalog Numbering System Each Eaton SPD Max Series unit has a name plate that identifies the 1.1 Manual Organization parameters used for manufacture. These parameters are expressed This Installation Manual describes the safe installation and operation in letters and numbers, to reflect the Series, kA Rating, Voltage of the Eaton®...
  • Page 3: Installation

    SPD INSTALLED WILL CAUSE INTERNAL DAMAGE TO THE SPD. THE SPD WILL ALSO CAUSE THE TEST TO FAIL. NOTICE Every Eaton SPD Max Series unit is tested at the factory for dielec- A POOR GROUND, OR GROUNDING/BONDING VIOLATIONS, COULD tric breakdown. No further SPD testing is required for installation.
  • Page 4 3. Determine the correct metal conduit for phase wires using Table 2 and install onto the SPD enclosure. If using the Form C 1. Before mounting the SPD Max Series device ensure that the contacts route Form C wires through a separate maximum ¾ inch mounting surface is sufficient to support the weight of the trade size hub and conduit.*...
  • Page 5 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 2.3.1 Installation Procedures for Top Entry If bottom or side entry isn’t practical for the installation of the SPD Max, top entry can be accomplished using the following steps.
  • Page 6: Operating Features

    Some SPD Max Series units have a Form C relay contact that allows for the remote indication of SPD status. Wiring of the Form C con- tacts is not mandatory for the operation of the SPD Max Series device.
  • Page 7 6. Restore power to the unit. 3.4 SPD Status Board (Dual SPD Applications Only) SPD Max Series devices with a S, U, W or Y suffix, SPMxxxxxxxxY, contain two internally mounted surge devices and a Dual SPD Status Board. The SPD Status board is internally mounted in the SPD Max enclosure and is used to indicate which SPD in a Dual SPD Max Series device has been compromised or lost.
  • Page 8: Troubleshooting

    Table 3, Troubleshooting Chart. This Troubleshooting Chart identifies possible causes and solutions to the malfunction. Further assistance may be obtained by calling Eaton’s Technical Resource Center (TRC) and speaking to a Surge Protection Application Engineer, at 1-800- 809-2772, option 4, sub-option 2, including being directed to the warranty process if applicable.
  • Page 9: Specifications

    Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 5.0 Specifications Table 4. Specifications Description Specification Surge current capacity per phase 100, 120, 160, 200, 250, 300, 320, 400, 600, 800 kA ratings available Nominal discharge current (In)
  • Page 10: Ordering Guidelines

    EMI/RFI filtering Providing up to 50dB of Noise Attenuation from 10kHz to 100Mhz Surge Counter with Alarm Silence (Reset) Button Example: SPD250480D3R = SPD Max Series, 250kA Per Phase, 480D Voltage, Standard with Counter Feature Package, NEMA 4 Enclosure with Internal Circuit Breaker. EATON www.eaton.com...
  • Page 11 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 Figure 8. DELTA (3W + G) with Circuit Breaker Figure 9. Wye (4W + G) with Circuit Breaker * SPD2 only installed in models with S, U, W and Y suffixes.
  • Page 12 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 Figure 10. High Leg Delta (4W + G) with Circuit Breaker Figure 11. Split Phase (3W + G) with Circuit Breaker * SPD2 only installed in models with S, U, W and Y suffixes.
  • Page 13 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 Figure 12. DELTA (3W + G) with Terminal Block Figure 13. Wye (4W + G) with Terminal Block * SPD2 only installed in models with S, U, W and Y suffixes.
  • Page 14 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 Figure 14. High Leg Delta (4W + G) with Terminal Block Figure 15. Split Phase (3W + G) with Terminal Block * SPD2 only installed in models with S, U, W and Y suffixes.
  • Page 15 Instruction Booklet IB158002EN Eaton SPD Max Series Surge Protective Device Effective October 2018 Figure 16. Product Dimensions EATON www.eaton.com...
  • Page 16: Warranty

    Eaton, to be free from defects in both workmanship CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON and materials. To register a SPD MAX with Eaton please go to www. CORPORATION, AND IS MERELY ON LOAN AND SUBJECT eaton.com/spd and click on the SPM Series Product Registration link...