Summary of Contents for Home Decorators Collection 1004151452
Page 1
USE AND CARE GUIDE WILDERCLIFF ELECTRIC FIREPLACE WALL MANTEL QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE 8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS...
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, WARNING: Under no circumstances should this fireplace be 9 a.m.
Page 4
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. • It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process NOTE:...
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times.
Pre-Assembly HARDWARE INCLUDED Part Description Part Number Quantity Cam Lock Screw PH-KDBZNC001 Cam Lock Connector PH-KDCZNC001 Metal Plate (pre-attached) CAM LOCK SCREW Screw 4 x 50 mm PH-SCRBLK006 Wood Dowel PH-DWLNTL001 Screw 4 x 25 mm SCREW 4 X 25MM Screw 3 x 12 mm PH-SCRBLK007 Tipping Restraint Hardware...
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. Part Description Quantity Bottom Shelf Left Surround Panel Right Surround Panel Top Surround Panel Left Side Panel Right Side Panel Top Panel Base Surround Rail Insert Base Rail Base Back Rail...
Assembly Preparing the Top Surround Panel Assembling the front surround Locate the Left Surround Panel (B), Right Surround Panel Locate the Top Surround Panel (D). (C) and Top Surround Panel (D). Insert the Wood Dowels (EE) into the pre-drilled holes Tighten the Screws (FF) using a Phillips on the edge of the each panel (B, C) where indicated as Screwdriver as shown.
Page 9
Assembly (continued) Attaching the side panels Preparing for the bottom assembly Locate the Left Side Panel (E) and the Right Side Panel (F). Insert Wood Dowels (EE) into the bottom edges of the Align pre-drilled holes on the edges of each side panel main assembly as indicated.
Page 10
Assembly (continued) Preparing the base back rail Preparing the base side rails Locate the Base Back Rail (J). Locate the Base Left Side Rail (K) and the Base Right Insert Wood Dowels (EE) into the pre-drilled holes of Side Rail (L) and place on a flat surface. the Base Back Rail (J) as indicated.
Page 11
Assembly (continued) Preparing the base front rail Attaching the base front rail Locate the Base Front Rail (M). Align the Base Front Rail (M) with the previously Insert Cam Lock Screws (AA) into the pre-drilled holes assembled base rails (K,L). of the Base Front Rail (M) where indicated.
Page 12
Assembly (continued) Preparing the Insert Base Rail Attaching the Insert Base Rail Insert the Cam Lock Screws (AA) and Wood Dowels Align the wood dowels and pre-drilled holes on the (EE) into the pre-drilled holes of the Bottom Shelf (A) as edges of the Insert Base Rails (I, I) with the holes shown.
Page 13
Assembly (continued) Preparing the surround for electric Attaching the top panel fireplace insert Remove the pre-attached Brackets (II) found on the side Place the Top Panel (G) onto the main assembly by aligning the previously installed cam lock screws and surround panels using a Phillips screwdriver.
Page 14
Assembly (continued) Installing the tipping restraint hardware When the Tipping Restraint Hardware (HH) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Your Unit comes with two Tipping Restraint Hardware Wall (HH).
Page 15
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. Powering the fireplace Adjusting the flame Push the Power button to supply power to all There are 6 brightness levels that can be selected: functions of the fireplace and put the insert in a standby mode.
Operation (continued) Replacing the remote control battery Disposing of used batteries The battery may contain hazardous substances that When the remote control stops operating or its range could endanger the environment and human health. seems reduced, it is time to replace the batteries with new ones.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Unplug the fireplace, remove the back panel of the fireplace and check that the The thermostat sensor is thermostat is plugged into the main circuit Display shows " " broken or disconnected. board. If this does not solve the problem contact customer service for a replacement thermostat sensor.
Page 19
Troubleshooting (continued) PROBLEM ROOT CAUSE CORRECTIVE ACTION Flame effect works but heater With the power on press and hold the POWER function does not and the emberbed button on the control panel for 10 seconds. The heater is disabled. flashes when the Heater button is Once re-enabled the emberbed lights will pressed.
Replacement Parts For replacement parts, call our customer service department at 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty. Remote Control Flame Circuit Board Blue LED Circuit Board Flame Generator Drive Motor Thermostat Sensor Blower/ Heater Assembly Control Panel Circuit Board...
Page 21
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Page 22
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Page 23
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Page 24
Questions, problems, missing parts? Before returning to the store call Home Decorators Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS RETAIN THIS MANUAL FOR FUTURE USE.
Need help?
Do you have a question about the 1004151452 and is the answer not in the manual?
Questions and answers