Usage; Preparing The Mattress For Use; Safety Information - Invacare Essential Care User Manual

4 Usage

4.1 Preparing the mattress for use

1. Remove all packaging before use.
2. Place the mattress directly on the frame of the bed.
IMPORTANT!
Compress rolled mattresses must be left to recover for
a minimum of 24 hours before use.
– Open zip fully (all 3 sides) to expose upper part of the
foam, allowing to recover and aerate.
– After 24 hours replace cover ensuring the corners of
the foam are fitted to the corners of the cover and
zip up fully.
Mattresses that are delivered flat packed can be placed
directly onto bed frame and used immediately.
The mattress is designed for beds with adjustable lying surface.

4.2 Safety information

WARNING!
It is very important for the patient to reposition
themselves, or to be repositioned, on a regular basis.
This must be based on the clinical judgement of a
qualified health care professional. This relieves pressure
which helps prevent both tissue compression and
potential ulcer formation.
– Always consult a qualified health care professional
before using the product.
– Monitor the patient frequently.
1587276-B
CAUTION!
– Make sure that the printed side of the mattress cover
always faces upwards.
– Make sure that the distance between the surface of the
mattress and the top of the side rail is at least 220 mm.
IMPORTANT!
If holes are present in the mattress cover, there is a
danger that liquids may ingress and contamination may
occur.
– Medical equipment including infusion pumps and
monitors should be attached to appropriate bed
accessories.
– For home use common causes of damage include
cigarette burns and the claws of pets that puncture
sheets, allowing fluid ingress and staining.
Usage
9