Software Setup; Installation Steps - Atmel BluSDK ATBTLC1000 User Manual

Proximity reporter

Hide thumbs Also See for BluSDK ATBTLC1000:

Table of Contents

Software Setup

4.1

Atmel Studio installation [Atmel Studio 7.0 (build 594) Installer – with .NET]

http://www.atmel.com/tools/atmelstudio.aspx.

(Note: SAM L21 Rev B/SAM D21/SAM G55/SAM 4S part pack is built-in as part of Atmel Studio

7.0)

Atmel USB Driver Installer 7.0.712 http://www.atmel.com/tools/atmelstudio.aspx.

Install the standalone ASF package from

http://www.atmel.com/tools/AVRSOFTWAREFRAMEWORK.aspx.

Note:

Refer to the BluSDK release notes for updates to version numbers of the components

mentioned above.

This ASF msi package will install the following examples within the Atmel Studio environment.

1. Proximity Profile Reporter Application for SAM D21

2. Proximity Profile Reporter Application for SAM L21

3. Proximity Profile Reporter Application for SAM G55

4. Proximity Profile Reporter Application for SAM 4S

Proximity Reporter – Getting Started Guide USER GUIDE

Atmel-42517C-ATBTLC1000-BluSDK-Proximity-Reporter-Getting-Started-Guide_USERGUIDE_022016

Table of Contents