Atmel BluSDK ATBTLC1000 User Manual page 19

After configuration of desired alert levels, click on the 'Link Loss Service' and then move the
9.
mobile phone away from the reporter. Based on the distance of separation, the Proximity reporter
will receive the path loss notifications based on alert settings. Keep moving after until you
observe the 'Link Loss' pop-up appear. The console log on the Proximity Reporter will display
the corresponding alerts and when link-loss happens, will report disconnection. The on-board
LED behavior will be as specified in
use-case application where this Link Loss service could be used (For e.g.: Key Fob). When the
user is in close proximity, the lock remains open. Subsequently the user moving out of range can
be trigger to close the lock.
Figure 7-12. Link Loss Pop-up on Proximity Monitor
Figure 7-13. Proximity Reporter Console Log for Link Loss
Chapter 6.1. The lock screen is used to emulate a common
Proximity Reporter – Getting Started Guide USER GUIDE
Atmel-42517C-ATBTLC1000-BluSDK-Proximity-Reporter-Getting-Started-Guide_USERGUIDE_022016
19
1
9