Atmel BluSDK ATBTLC1000 User Manual page 18

After configuration of desired alert levels, click on the 'Immediate Alert Service' and then move
8.
the mobile phone away from the Proximity reporter. Based on the distance of separation, path-
loss is plotted on the zone radar (using received RSSI values from the Proximity Reporter).
Based on the zone, the Proximity Monitor sends the corresponding alert level. The console log
on the Proximity Reporter will display the corresponding alerts and on-board LED behavior will be
as specified in Chapter
Figure 7-10. Proximity Reporter Path-Loss Plot Across Safe, Mid., and Danger Zone
Figure 7-11. Proximity Reporter Path-Loss Console-Log Notifying Alerts
6.2.
Proximity Reporter – Getting Started Guide USER GUIDE
Atmel-42517C-ATBTLC1000-BluSDK-Proximity-Reporter-Getting-Started-Guide_USERGUIDE_022016
18
1
8