Atmel BluSDK ATBTLC1000 User Manual page 20

10. After link loss the mobile application will attempt to reconnect to the PXP Reporter. On moving
the mobile device closer to the reporter, the connection is re-established.
11. The TX power service is used to retrieve the TX Power of the Proximity reporter. Click on the TX
Power Service icon in the services screen. The Proximity Monitor reads the TX Power value from
the Proximity reporter and displays it as shown below.
Proximity Monitor – Reading TX Power Service
Figure 7-14.
Proximity Reporter – Getting Started Guide USER GUIDE
Atmel-42517C-ATBTLC1000-BluSDK-Proximity-Reporter-Getting-Started-Guide_USERGUIDE_022016
20
2
0