Replacing Heel Loops - Invacare 6895 Owner's Operator And Maintenance Manual

SECTION 7
REPLACING HEEL LOOPS (FIGURE 3)
1. Note the position of hex bolt, coved washers and locknut for reinstallation.
2. Remove the hex bolt, coved washers and locknut that secure the lower footrest to
the footrest support.
3. Remove the lower footrest.
4. Remove the phillips bolt, spacer and locknut that secure the existing heel loop to
the lower footrest.
5. Slide the existing heel loop off the lower footrest.
6. Replace heel loop.
7. Reverse STEPS 1-6 to reassemble.
NOTE: When securing heel loop to lower footrest, tighten the phillips screw and locknut until the
spacer is secure.
Lower Footrest
Rehab Shower Commode Chair
Phillips Bolts
FIGURE 3 - REPLACING HEEL LOOPS
24
FRONT RIGGINGS
Heel Loop
Locknuts
Part No. 1118394