Using Seat Cover; Removing/Installing Seat Positioning Strap - Invacare 6895 Owner's Operator And Maintenance Manual

SECTION 5
INSTALLING (FIGURE 2)
1. Move armrests out of the way by squeezing the armrest release lever and lifting.
2. Place seat in desired direction (DETAIL "A" of FIGURE 2).
3. Push seat down until it locks onto Rehab Shower Commode chair frame.
USING SEAT COVER (FIGURE 3)
Invacare provides a cover for the seat hole opening to be used if desired during shower
use. Refer to FIGURE 3.

REMOVING/INSTALLING SEAT POSITIONING STRAP

(FIGURE 4)
REMOVING
1. Remove the seat. Refer to REMOV-
ING/INSTALLING PADDED SEAT
in section of this manual.
2. Move the swing back arm out of
the way. Refer to POSITIONING
SWING-BACK ARMS in SECTION
8 of this manual.
3. Remove the respective mounting
screw and washer that secures each
half of the seat positioning strap to
the seat frame.
INSTALLING
1. Position the two (2) NEW seat
positioning strap halves on the seat
frame.
2. Reinstall the two (2) mounting
screws and locknuts to secure the two (2) halves of the seat positioning straps to
the seat frame.
3. Reinstall the seat. Refer to REMOVING/INSTALLING PADDED SEAT in section of
this manual.
Rehab Shower Commode Chair
FIGURE 3 - USING THE SEAT COVER
FIGURE 4 - REMOVING/INSTALLING
20
Seat Cover
Seat
Seat Positioning
Strap
Washer
Mounting Screw
Frame
SEAT POSITIONING STRAP
SEAT AND BACK
Part No. 1118394