Figure 6: Smd For Amf Mode - Briggs & Stratton GC1031 Operation Instructions Manual

transferred to the genset. If the Mains voltage returns to normal, the controller will sense this and return
the load back to the Mains, further it will stop the genset after a cool down period.
Engine Off
Engine
Cooling
Down in LIM
Mains = 0 and
No Warning/No Electric Trip/No Shutdown
Emergency shutdown input = 1
Or Genset shutdown action = 1
Mains ON = 1
or Electric trip
Engine On

Figure 6: SMD for AMF mode

Engine Start
Time >= [Time of warm up + Time of load
transfer] and Mains ON = 0 and Remote
start = 1
Page | 15