System Controller Position Button Description Start Button Works in MANUAL MODE only. Press this button to initiate the start sequence of the engine. Stop Button Works in MANUAL MODE only. Press this button to initiate the stop sequence of the engine. Repeated pressing or holding the button for more than 2 seconds will cancel current phase of the stop sequence (like ramping the power down or cooling) and next phase will continue.
Display Screen Structure The displayed information is structured into pages and screens. Use the PAGE button to switch over the pages. 1. The Measurement page consists of screens that display measured values including voltage, current, and oil pressure, and computed values including generator power, statistical data, and alarms.
Setpoint Change Password >Basic Settings Not ready Engine Params Engine Protect Page Gener Protect AutoMains Fail No Timer Extension I/O Date/Time Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio 2000 /5A Enter Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio 2000 /5A...
Controller Information Screen InteliLite NT ComAp 2007-2008 Not ready Enter + Page IL-NT-x.y Serial:12345678 SW ver: x.y, x.y No Timer Appl : AMF25 Branch: Standard Page Languages >English Chinese Enter Page User interface: User >Engineer Enter Serial: 12345678 Pwd. dec.: 1234567890 Page...
Controlador de sistema Posición Botón Descripción Botón de arranque Sólo funciona en el MODO MANUAL. Presione este botón para iniciar la secuencia de arranque del motor. Botón de parada Sólo funciona en el MODO MANUAL. Presione este botón para iniciar la secuencia de parada del motor.
Estructura de la pantalla La información que se muestra está estructurada en 2. La página Setpoints (Puntos de referencia) páginas y pantallas. contiene todos los puntos de referencia organizados en grupos y un grupo para ingresar Use el botón PAGE (BUSCAR) para navegar por las una contraseña.
Cambio de punto de referencia Password >Basic Settings Not ready Engine Params Engine Protect Page Gener Protect AutoMains Fail No Timer Extension I/O Date/Time Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio 2000 /5A Enter Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio...
Pantalla de información del controlador InteliLite NT ComAp 2007-2008 Not ready Enter + Page IL-NT-x.y Serial:12345678 SW ver: x.y, x.y No Timer Appl : AMF25 Branch: Standard Page Languages >English Chinese Enter Page User interface: User >Engineer Enter Serial: 12345678 Pwd.
Contrôleur de système Position Bouton Description Bouton Démarrage Fonctionne en MODE MANUEL seulement. Appuyer sur ce bouton pour initier la séquence de démarrage du moteur. Bouton Arrêt Fonctionne en MODE MANUEL seulement. Appuyer sur ce bouton pour initier la séquence d'arrêt du moteur. Appuyer sur le bouton de façon répétée ou tenir le bouton enfoncé...
Structure de l’écran d’affichage Les renseignements affichés sont présentés sur des réglages organisés en groupes et aussi un groupe pages et des écrans. spécial pour l’entrée du mot de passe. Utilisez le bouton PAGE pour passer d’une page à 3. La page HISTORIQUE présente le journal de l’autre.
Changement de réglage Password >Basic Settings Not ready Engine Params Engine Protect Page Gener Protect AutoMains Fail No Timer Extension I/O Date/Time Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio 2000 /5A Enter Enter Page Gen-set Name >Nominal Power *Nomin Current CT Ratio 2000 /5A...
Écran d’information du contrôleur InteliLite NT ComAp 2007-2008 Not ready Enter + Page IL-NT-x.y Serial:12345678 SW ver: x.y, x.y No Timer Appl : AMF25 Branch: Standard Page Languages >English Chinese Enter Page User interface: User >Engineer Enter Serial: 12345678 Pwd. dec.: 1234567890 Page...