Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
INSTRUCTION FOR USE: MANIFOLD
1. GENERAL
EN
1.1. INFORMATION ABOUT THIS INSTRUCTIONS MANUAL
This instruction is only intended for use with manifold product type:
•
MPLH0XS, MPLHEXS – Single stage manifold for one cylinder
•
MSLH0XS , MSLHEXS – Single stage manifold for one cylinder
Manifolds of this type are suitable to take gas out of gas cylinder or bundle and reduce the pressure. These
manifolds were installed as permanently wall assembly and are connected to gas cylinder or bundle with
coil or hose.
These instructions enable you to operate the system safely and e ciently. These instructions form an inte-
gral part of the system and must always be kept with the system and within easy reach of sta at all times.
Prior to commencing any work, the sta must read these instructions carefully and understand the contents.
Observance of all the safety information and instructions for operation that are contained in these instruc-
tions is essential to ensure work safety.
Local accident prevention regulations and general safety regulations governing the use of the system must
also be observed.
Illustrations in these instructions serve to ensure a basic understanding of the system and may di er from
the actual version.
1.2. INFORMATION ABOUT THIS MANIFOLD
Manifolds of this type are only suitable for gases defi ned as standard gas. The maximum working pressure
for these manifolds is 300 bar.
Single stage manifolds consists of valves and a pressure regulator with metal diaphragm, created and
approved as ISO7291/ISO10297 including oxygen shock test.
Product Line
H0 - High Pressure Regulator
with
FKM
Relief Valve Seat
LV - Low Pressure Regulator
with
FKM
Seat
DruvaPUR Line
(purity 6.0 | brass chrome plated)
•
Suitable Gases
(including their mixtures)
•
High Purity
•
Inert
•
Flammable
•
Oxidizing
•
Use for O2
•
Not Suitable Gases
(including their mixtures)
•
Corrosive
•
Toxic
•
Not for CO2, N20
•
Suitable Gases
(including their mixtures)
•
High Purity
•
Inert
•
Flammable
•
Oxidizing
•
Use for O2
•
Not Suitable Gases
(including their mixtures)
•
Corrosive
•
Toxic
•
Not for CO2, N20
4/68
DruvaPUR Line
(purity 6.0 | stainless steel)
•
Suitable Gases
(including their mixtures)
•
High Purity
Inert
•
Flammable
•
Oxidizing
•
Corrosive (in doubt ask)
•
Toxic (in doubt ask)
•
Not Suitable Gases
(including their mixtures)
•
Not for O2
•
Not for CO2, N20
•
Not for NH3, SO2, H2S
•
Suitable Gases
(including their mixtures)
•
High Purity
•
Inert
•
Flammable
•
Oxidizing
•
Corrosive (in doubt ask)
•
Toxic (in doubt ask)
•
Not Suitable Gases
(including their mixtures)
•
Not for O2
•
Not for CO2, N20
•
Not for NH3, SO2, H2S
Advertisement
Chapters
Table of Contents
