Stopping Timer; Kitchen Timer; Setting Kitchen Timer; Stopping Kitchen Timer - Hansa BHI68014 Instruction Manual

OPERATION

Stopping Timer

To stop the timer countdown before the set time has elapsed:
● Touch the cooking zone selection sensor (1) to select the a timer-controlled cooking zone.
The cooking zone heat setting will flash.
● Touch the timer sensor field (5) to activate the timer. Timer digits will flash.
● Touch „-" (2) sensor field to reduce duration to „00". Timer function will be deactivated
while the cooking zone continues to operate until it is switched off manually.

Kitchen Timer

Programming the cooking time clock can be used as a timer, if no time is set to control
the cooking zones.

Setting Kitchen Timer

If the hob is switched on:
● Touch the timer sensor (5). The respective cooking zone display will show „10".
● Now, select the desired kitchen timer setting by touching „+" or „-" (2) sensor field. Touch
the sensors (2) to change duration by 1 minute, touch and hold the sensor to change
the duration by 10 minutes. Kitchen timer countdown will begin immediately after several
seconds.
Once the countdown is complete, an acoustic signal will be heard for 30 seconds. The
display will show „- -".

Stopping Kitchen Timer

When the set time has elapsed an acoustic signal is sounded, which can be muted by touching
any sensor field. If no sensor field is touched, the acoustic signal will stop automatically
after 30 seconds.
To stop the kitchen timer countdown before the set time has elapsed:
● Touch timer sensor field (5) to activate the timer. Kitchen timer digits will flash.
● Touch „-" (2) sensor field to reduce time to 00. Kitchen timer will stop.
42