The Residual Heat Indicator; Limiting The Operating Time - Hansa BHI68014 Instruction Manual

OPERATION

The residual heat indicator

Once a cooking zone is switched off, „H" is displayed on the relevant cooking zone's display
to warn that the „cooking zone is still hot!".
Do not touch the cooking zone at this time owing to the risk of burns from resi-
dual heat, and do not place any object on it which is sensitive to heat!
When the residual heat indicator goes out, cooking zone can be touched, however keep in
mind that it may still be warmer than ambient temperature.
When there is no power, the residual heat indicator does not light up.

Limiting the operating time

In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last heat
setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual co-
oking zones at any time in accordance with
the operating instructions.
Cooking heat
setting
1
2
3
4
5
6
7
8
9
40
Maximum
operating time
(hours)
8
8
8
4
4
4
2
2
2