Timer; Setting The Timer; Checking Timer Countdown; Changing Timer Setting - Hansa BHI68014 Instruction Manual

OPERATION

Timer

Timer function makes cooking easier by making it possible to set Duration. It can also be
used as a Kitchen Timer.

Setting the Timer

Timer function allows the cooking zone to be switched off after the set time has elap-
sed. The timer function can only be set when a cooking zone is operating (heat setting is
greater than "0"). Timer can be activated at any time for one, selected cooking zone only.
Timer countdown can be set from 1 to 99 minutes.
To set the timer:
● select a cooking zone by touching cooking zone selection sensor field (1) and select
the desired heat setting from 1 to 9 touching "+" or "-" (2) sensor field. The display will
show all the selected heat settings from 1 to 9 and a decimal point.
● then, during the next 10 seconds, touch the Timer selection sensor field (5). The re-
spective cooking zone display will show "10".
● Now, select the desired Timer setting by touching "+" or "-" (2) sensor field. Touch the
sensors (2) to change duration by 1 minute, touch and hold the sensor to change the
duration by 10 minutes. Timer countdown will begin immediately after several seconds.
Once the set Duration has elapsed the appliance will turn off automatically and a single
beep will be heard. The display will show "- -".
The decimal point appearing by the numbers means the timer is active.

Changing Timer setting

Programmed Timer setting can be changed at any time.
● Touch cooking zone selection sensor field (1) to select the desired cooking zone. The
heating setting will flash for 10 seconds.
● Touch the timer sensor field (5) to activate the timer. Timer digits will flash
● Use "+" or "-" (2) sensor field to adjust the timer setting.

Checking Timer countdown

You can check the remaining cook time at any moment (on the display).
41